Pu leather for Racket Grip
PU racket grip leather designed for athletes, we have demonstrated a unique experience effect in the comfort and function of the product, made of polyurethane（PU）
Racket rubber texture
Usually, the texture of racket grip is relatively small, whether it is badminton racket, tennis racket, golf club, or even fishing rod, because the complex texture will not only reduce the anti-slip effect during use, but also affect the service life and make it less wear-resistant. We can process the surface into a microporous effect, which is also loved by most athletes.
What textures does the grip leather have?
Non-woven base fabric
Spunlaced base fabric
What are the characteristics of racket grip?
Absorb sweat
Athletes who often sweat on their palms will pay attention to the sweat absorption effect of the grip. Polyurethane (PU) grips can make it easier for users to control the racket. PU leather is one of the primary materials for grips, with diverse properties and comfort.
Anti-slip
The anti-slip properties of the grip greatly affect the player’s ball control, whether in badminton, golf or tennis games; the grip made of polyurethane (PU) is sticky, and the palm can be sweaty to hold the racket. It can be said to have an anti-slip effect and improve the game experience
Which sports fields are suitable?
We focus on the research and development of functional leather in the field of sports products, such as golf club grip tape, badminton racket grip tape, tennis racket grip tape, mountaineering pole tape, fishing rod tape, hockey stick tape, etc.
How to wrap a grip on a tennis racket?
Method 1：Wide side winding method
1.First clean the surface of the inner grip rubber. The outer shrink film of the new racket must be torn off to prevent the outer grip rubber from slipping on it.
2.Align the beginning part with the back cover of the handle, slowly and forcefully turn the handle for one circle, and wrap it evenly one by one. The overlapping width is about 1/2 of the width of the grip rubber. Right-handed people should wrap it from left to right, and left-handed people should wrap it from right to left.
3. Wrap it to the edge of the front cover, tear off the double-sided tape, and press it tightly.
4. Note: When using the wide edge wrapping method, the double-sided tape at the tip of the hand glue edge can be pasted to seal, and the protective tape can be selected according to personal preference
Method 2： Narrow side winding method
1.Remove the narrow edge of the double-sided tape.
2.When wrapping, start from the bottom of the racket handle and wrap from bottom to top. Right-handed people should wrap from left to right, and left-handed people should wrap from right to left.
3. At the end of the wrapping, a part should be reserved for trimming with scissors.
4. Finally, use sealing tape to close the edges. You can tear it off and then flatten it with your fingers at the moment of tearing. This way the tape will fit better and look more beautiful.
Product characteristic parameters
| Item | Project Data/Parameters | Item | Project Data/Parameters |
|---|---|---|---|
| Regular PU | Regular PU | ||
| Width | 52-54" | Elongation percentage(break) | R:45% W:80% |
| Thickness | 0.5-2.0mm | Peel Strength | R:5.7kg W:4.5kg |
| Lead | ＜90PPM | Tear Strength | R:6kg W:5kg |
| Formaldehyde | ≤75PPM K | Bend Strength | Room temperature: 10000 times |
| Pheno丨Benzene | ＜3PPM K | Color Fastness To Rubbing | Wet Wiping:4 Level Dry Wiping:3 Level |
| Hexavalent Chromium | ＜3PPM | Abrasion Resistance | 500 rpm undamaged |
| Carcinogenic Dyes | ＜1PPM | Hydrolysis resj stance | 5 Years |
| PAH | ＜10PPM | Colour fastness to phenolic yellowing | Level 4 |
| PH value | 4.5-8.5 | ||
| DMFA | ＜1000PPM | ||
| APEO=NPEO+OPEO | ＜100PPM | ||
| Phthalates | 16P＜1000PPM | ||
| AZO Dyes | 20PPM | ||
| Disperse Dyes | NONE | ||
| EN71-3 | Comply with international standards | ||
| Chloro sane | ＜1000PPM | ||
| Organotin Compound | ＜1PPM |
협력 채널
저희는 24시간 온라인 상태를 유지하여 이메일을 보내거나 주문에 대해 문의할 수 있도록 전화를 드리는 등 고객의 문의를 기다립니다!
- IDM：수잔 장
